Table of Contents
Advertisement
Technical Manual
Section 5 - Engineer's Program
The Engineer's Program enables the machine to be configured, and sales and diagnostic
information viewed. The machine is supplied with default configurations for minimum
setup time, however some setup is required and certain settings can be adjusted for
individual consumers and their preferences. For detailed information on how to access this
program, navigate, select and enter values refer to in Section 3 - Programming Mode .
The menu structure is laid out below with brief explanations for each screen and
references to more detailed information and tasks.
5.1 Menu Overview
Main Menu page 1/2 (Section 5.2)
Data Recall (Section 5.3)
Non Resettable Sales Data
Resettable Sales Data
Sales Groups
Events
TM
SureVend
Diagnostics (Section 5.4)
Active errors
Error History
MDB Logging
Test page 1/2 (Section 5.5)
Switches & Sensors
Components
the cumulative data values for the life of the machine/atlas
board
enables data to be viewed and cleared, enabling data to be
recorded over a period of time
enables drinks to be linked as a group for easier
reviewing
enables certain events which have happened on the machine to
be viewed: power losses, door opened, last actions etc..
displays details of SureVend
enables any current errors to be viewed, if the error is rectified
it will automatically be removed from the list
enables errors which have occurred in the past to be viewed.
(this data can be cleared)
Enables the logging of the MDB line (NOTE: Debug Log Enable
must be enabled in System Settings for this feature to work).
displays the current state of all switches and sensors in the
machine
enables individual or collective components to be tested
47
TM
activities
Advertisement
Table of Contents
