Disassembly & Reassembly - Pu 3000 Pneumatic, Pu 3000 Airmix; Mixer; Piloted Valves - SAMES KREMLIN PU 3000 Documentation

17. DISASSEMBLY & REASSEMBLY - PU 3000 PNEUMATIC, PU 3000 AIRMIX
The pump is manufactured under the ATEX agreement and can not be modified.
SAMES KREMLIN will not be held responsible for any failure to comply with that


MIXER

Unscrew the mixer assembly and replace it with a new one.


PILOTED VALVES

CARTRIDGE OF A FLUID VALVE (IND. 9A / 9B / 9C / 9D) (REFER TO DOC. 573.188.050)
C 2
Unscrew the 3 screws (7).
Extract the valve from the module body.
Unscrew the needle (1a / 1b).
Unscrew the cylinder (4a / 4b).
Hold rod carrier (6), unscrew the needle rod and remove cartridge with rod assembly (9a /
9b / 9c / 9d). Remove the seals.
SAMES KREMLIN
CAUTION : Before any work is carried on the pump, stop the machine after
carrying out flushing, shut off the compressed air supply and depressurize the
circuits triggering the gun.
C 2
A 1
instruction.
Page 44
A 1
A 1
Manual : 573.199.112