DOWNLOADING DATA FROM PU 3000 TO A COMPUTER
Preamble / "Hyper Terminal" issue
This application is necessary. Two cases are to be considered :
.PC under Windows XP/Vista/2000,
.PC under Windows 7.
•
With Windows XP/Vista/2000, "HyperTerminal" application is available with the following path :
Menu Start
•
With Windows7, you will need to download freeware "HyperTerminal" from some website.
For example :
Once it is downloaded and installed, carry out a simple test of opening and closing.
It should look like this whenever open :
Switching of the control box
•
Switch the control box.
•
Link a "RS232 male / USB male" cable to the plug located below the Micro back frame, the other
end to the USB plugs on the computer. Cable not supplied by KR.
•
According to the USB plug used a "port com" number appears in the "device manager" screen
(Menu Start > Control panel > Device manager).
SAMES KREMLIN
>
>
All programs
Accessories
http://www.01net.com/telecharger/windows/Bureautique/telephonie/fiches/5829.html
>
Communications
Page 28
>
HyperTerminal
Manual : 573.199.112