Table of Contents
Advertisement
FLUSHING (F2)
This menu is used for flushing. When you want to flush the machine, activate
the F2 menu.
After confirming via
Check the solvent pump supply valve is open.
A countdown begins : F2-9, then F2-8.
The machine stops when the countdown is over.
The machine closes the solvent valve and the mixed material flushing has ended.
Nota : Close the spraying air valve during the 'FLUSHING' stage.
During the first flushing, you can determine the solvent volume (F3 P12 parameter) consumed
during the flushing time (F3 P11 parameter). Once determined, enter your parameters
accordingly.
CONSUMPTIONS / PRINT (F4)
The 'F-4' menu enables to view the consumptions of each material (color, catalyst in L). You can also
print the ratio of the consumptions as well as the parameters of the applications : you must connect a
connection cable to a printer or to a computer (RS 232 connection) (printer not provided) (refer to
Downloading data from PU3000 to a computer page 28).
Consumption of the base
Consumption of the catalyst
Consumption of solvent
SAMES KREMLIN
OK
, the machine opens the solvent valve. The buzzer sounds intermittently.
Page 26
OK
when you are on
Consumption of the VOC
Enables
the
user
consumptions activating the key
thanks to a sub menu
Enables
the
user
consumptions and the parameters
OK
activating the key
Manual : 573.199.112
to
reset
the
OK
to
print
the
Advertisement
Table of Contents
