SAMES KREMLIN PU 3000 Documentation page 128

CAUTION!
It is forbidden to use material containing high concentrations of halogenated hydrocarbon
solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause
explosion risk causing serious or fatal injury.
EQUIPMENT REQUIREMENTS
Guards (motor cover, coupling shields, connectors,...) have been designed for
PUMP
Before carrying out any work, it is imperative to read and clearly understand the disassembly and
reassembly instructions before servicing. The operator must understand the equipment and the
safety instructions. These instructions are available in the equipment manuals.
The air motor is designed to be mounted with a pump. Never modify any components or
couplings. When operating, please keep hands away from moving parts. Before starting up the
equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or
drain valves fitted are in good working order.
HOSES
 Keep hoses out of circulation areas, moving parts or hot surfaces,
 Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C
/ 32° F,
 Never pull or use the hoses to move the equipment,
 Tighten all fittings as well as the hoses before operating the equipment,
 Check the hoses regularly; change them if they are damaged,
 Never exceed the maximum working pressure (MWP) indicated on the hose.
USED PRODUCTS
Considering the wide variety of products that are available and can be used in our equipment it is
impossible to check and make recommendations for all chemical data,regarding the risks of
possible chemical attack and their long term chemical reaction
SAMES KREMLIN can not be held liable for :
 compatibility of wetted parts,
 risks to staff and the surroundings,
 for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.
It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,
fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated
exposures of the staff,
SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages
caused by the use of chemicals.
PRESSURE REGULATOR

Install conductive hoses upstream and downstrean of the regulator.

Respect the inlet and outlet pressures of the regulator.
SAMES KREMLIN
The manufacturer will not be held responsible for bodily injury or failure
and / or property damage due to destruction, the overshadowing or the
partial or total removal of the guards.
a safe use of the equipment.
Page 5 Manual : 573.203.112