Table of Contents
Advertisement
FLUID SECTION, MODEL C100 (BASE) (REFER TO DOC. 573.080.050)
Guards (air motor cover, coupling shields, housings ...) have been designed for
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards.
SUCTION VALVE
Unscrew suction valve (5) by holding cylinder (2).
The ball (10a / 10b) is secured on the valve (5) by means of a circlips (9).
Clean the parts.
Reinstall suction valve (5) and seal (25). Replace them if necessary.
EXHAUST VALVE AND MOBILE PACKING
Unscrew cylinder (2) and pull it downwards.
Unscrew exhaust valve (6) by holding piston (3).
Remove ball (17a / 17b), washer (12a / 12b) and seal (13a / 13b / 13c).
Clean the parts.
Remount the parts in reverse order.
For that :
•
Install seal (13a / 13b / 13c), washer (12a / 12b) and ball (17a / 17b) onto exhaust valve (6).
•
Screw exhaust valve (6) into the piston (3). The seal must be blocked by screwing exhaust valve
(6) strongly.
If necessary replace seal (8) when reinstalling cylinder (2).
UPPER PACKING
Separate motor piston rod from hydraulic
piston (3).
Unscrew wetting-cup (4) by means of the
wrench supplied with the pump.
Pull piston (3) upwards to remove upper
packing seals (21 and 22a / 22b) or the upper
packing (18a / 18b).
Reinstall parts in reverse order. Be certain
seals (21 and 22a / 22b) or upper packing
(18a / 18b) are installed properly (direction,
order and assembly dimension).
Tighten wetting-cup (4).
After reassembly, fill up the pump with
solvent
and
maximum in the fluid section. Then stop
the pump and open exhaust valve to
depressurize.
Retighten wetting-cup (4) by means of the
wrench in order to be in accordance with
the opposite drawing.
Before reassembling the different components :
- Clean the parts with the appropriate cleaning solvent,
- Install new seals if necessary after having lubricated them with PTFE grease,
- Install new parts if necessary.
SAMES KREMLIN
safe use of the equipment.
increase
pressure
to
Page 46
Manual : 573.199.112
Advertisement
Table of Contents
