Proportion And Output According To The Ratio; Pu 3000 Pneumatic, Airmix® And Airless Versions - SAMES KREMLIN PU 3000 Documentation

12. PROPORTION AND OUTPUT ACCORDING TO THE RATIO


PU 3000 PNEUMATIC, AIRMIX® AND AIRLESS VERSIONS
Operating area of the PU 3000 pneumatic, Airmix® and Airless
* Example :
If you want to get a flow rate of 1000cc/min with a proportion of 2/1 (50%), then the P6 parameter (injection
volume of the catalyst) must be adjust between 10 and 20cc.
Nota :
- Tests carried out with same fluid viscosity materials.
The adjustments of pressure and of injection value depend upon the fluid viscosity of the used material.
- The P6 parameter impacts the mixture, you should confirm this parameter by using the mixture on the
part you want to paint.
SAMES KREMLIN Page 38 Manual : 573.199.112