Downloading Data From Cyclomix Micro To A Computer - SAMES KREMLIN Cyclomix Micro User Manual

13. DOWNLOADING DATA FROM CYCLOMIX MICRO TO A COMPUTER

Nota : The following procedure has some screenshots with the PU 3000 quote . The procedure is
the same for the Cyclomix
Preamble / "Hyper Terminal" issue
This application is necessary. Two cases are to be considered :
.PC under Windows XP/Vista/2000,
.PC under Windows 7.
•
With Windows XP/Vista/2000, "HyperTerminal" application is available with the following path :
>
Menu Start
•
With Windows7, you will need to download freeware "HyperTerminal" from some website.
For example :
Once it is downloaded and installed, carry out a simple test of opening and closing.
It should look like this whenever open :
Switching of the control box
•
Switch the control box.
•
Link a "RS232 male / USB male" cable to the plug located below the Micro back frame, the other end
to the USB plugs on the computer. Cable not supplied by KR.
•
According to the USB plug used a "port com" number appears in the "device manager" screen (Menu
Start > Control panel > Device manager).
SAMES KREMLIN
TM
Micro.
>
All programs Accessories
http://www.01net.com/telecharger/windows/Bureautique/telephonie/fiches/5829.html
Page 27
> >
Communications HyperTerminal
Manual : 573.191.112