Ibike Setup Screens - iBike Gen III Operating Instructions Manual

iBIKE SETUP MODE
All of the required setup and calibration steps are accessed through the Set-Up mode.
How to enter the Set-Up mode
1. Click any button to wake-up the iBike
2. Press and hold the up-arrow for about 2 seconds (UP-ARROW FOR SET-UP); the
words "set up" will appear. When the set-up screen appears release the button.
How to exit the Set-Up mode
1. Press-hold the UP arrow for two seconds, OR
2. Do not press any button for 30 seconds.
NAVIGATING THE iBIKE SETUP SCREENS
Once entering the "Setup" mode (press-hold up arrow for two seconds), scroll to any setup
screen by clicking the up or down arrows located on the red button:
Click the up arrow: advance to the NEXT setup screen,
Click the down arrow: return to the PREVIOUS setup screen
Each setup screen displays one step of the iBike's setup process.
iBike screens are organized like a Rolodex. You can scroll forwards and backwards to any
setup screen. When you reach the final screen and click the up arrow to advance to the
next screen, you will return to the first screen.
6
Copyright Velocomp LLP 2005-2011