iBike Gen III Operating Instructions Manual page 14

THE IBIKE PROFILE
The information you entered in the Fast Start sequence, in combination with the Cal Ride,
together form a "Profile", a description of all the things that make your iBike work properly
with you and your particular bike. A profile includes:
1) total bike and rider weight
2) tire circumference
3) wireless IDs (if you are using a wireless mount)
4) calibration data (drag coefficients, riding tilt, and wind scaling factor)
Your iBike stores two Profiles in its memory, and your iBike software can store as
many profiles as you like. Any two of the profiles stored on your iBike software can be
uploaded into your iBike.
IMPORTANT: TO LEARN HOW TO STORE A PROFILE ON YOUR COMPUTER AND TO LOAD A
PROFILE INTO YOUR IBIKE, REFER TO THE "IBIKE SOFTWARE INSTRUCTIONS".
When you completed your iBike Fast Start sequence and Cal Ride, your information was
stored in Profile 1.
You can create a completely separate profile and store it in Profile 2. This is useful if you
own two bikes or have two different riding positions (for example, hoods and TT).
Here is how to select a different profile:
Enter Setup and click the down arrow repeatedly to find the Set Prof (Set Profile) screen:
Click the center button; the default setting is profile 1
13
Copyright Velocomp LLP 2005-2011