Coastdowns - iBike Gen III Operating Instructions Manual

16. Once you get to a speed of about 8 mph, the words "DONE COAST" will flash for a
few seconds, then the screen "CALC COAST" (calculating coast) will appear, then
main coast down screen will appear, indicating that the measurement is complete.
CRITICAL: FOR BEST RESULTS PERFORM 5 TO 8 COAST DOWNS, BACK-TO-BACK.
RETURN TO THE PLACE WHERE YOU STARTED YOUR COAST DOWN AND DO MORE
COAST DOWNS BY REPEATING STEPS 6-15.
TIP: IF YOU ACCIDENTALLY INITIATE THE COAST-DOWN CALIBRATION PROCESS YOU
MAY STOP IT BY CLICKING THE CENTER BUTTON. THE SCREEN WILL SAY "Abrt COASt"
(abort coast). THE COAST-DOWN READINGS CURRENTLY STORED WILL BE UNCHANGED.
RACER TIP: BY DEFAULT, THE COAST DOWN USES A FIXED VALUE OF ROLLING
RESISTANCE (CRR = 0.0055) IN THE COAST DOWN MEASUREMENT.
IMPORTANT: YOUR COAST DOWN AND CAL RIDE DATA MUST BE DOWNLOADED AND
ANALYZED IN THE IBIKE SOFTWARE TO PROVIDE YOU THE BEST RESULTS. SEE THE
"IBIKE SOFTWARE INSTRUCTIONS" FOR DETAILS.
32
Copyright Velocomp LLP 2005-2011