Day-To-Day Setup Screens - iBike Newton+ Operating Instructions Manual

DAY-TO-DAY SETUP SCREENS

Your Newton+ setup is designed around one-time setup sequences. Once these sequences
are performed, you'll rarely need to access them to make changes. So, unless you choose
to reveal the sequence steps, they'll remain hidden from view.
Some Newton+ setup and calibration steps are very common, so much so that you'll want
easy access to them. We've gathered the most common setup items together as "day-to-
day" screens that you'll find whenever you enter setup.
All of the day-to-day setup screens are listed below. Many of them have been described so
we won't repeat their function here. The new screens not described previously will be in
BOLD:
1) CAL WIND
This optional calibration is the first screen you'll see when entering Setup. Once you
click the center button to perform the wind calibration, your Newton+ will
automatically exit setup after a few seconds, OR you can click the up arrow to move
to the next screen:
2) ON FAST REC (POWERSTROKE MODELS ONLY)
3) CAL RIDE
4) BATT % (battery voltage percentage). Use this screen to find out the percentage of
battery energy remains in your Newton+
5) ALT (altitude)
Use this screen to enter the starting elevation for your ride.
TIP: THE STARTING ELEVATION IS OPTIONAL AND NOT REQUIRED FOR ANY
NEWTON+ CALCULATIONS
IMPORTANT: EVEN IF YOUR NEWTON+ HASN'T MOVED, THE STARTING ELEVATION
WILL CHANGE WHEN WEATHER CONDITIONS CHANGE. THIS IS NORMAL.
6) TOTAL WGHT
This number is the total weight of your bike and you with clothing and gear
7) SCAN (Wireless Setup)
8) SET FILT
9) SET PROF
10) REC INT (RECORD INTERVAL)
Your Newton+'s memory fills with information as you ride. You can select in this screen
how often to record your ride information:
Click the center button, then select 1 sec (one second recording interval) to record
about 155 ride hours of data, OR
Click the up arrow to select 5 sec (five second recording interval) to record about
768 hours of data.
TIP: YOU CAN HAVE AS MANY RIDE FILES AS YOU WANT. THEIR TOTAL TIME LENGTH IS
DETERMINED BY YOUR RECORDING INTERVAL
TIP: YOU'LL GET WARNING MESSAGES WHEN YOUR RIDE MEMORY IS NEAR CAPACITY. IF
YOUR RIDE MEMORY FILLS TO 100% DURING A RIDE YOUR NEWTON+ WILL CONTINUE TO
FUNCTION BUT YOU'LL LOSE THE RIDE DATA FOR THAT RIDE.
34
Copyright Velocomp LLP 2005-2013