"Auto-Wind" And "Cal Wind" Feature - iBike Gen III Operating Instructions Manual

If you have separate speed and cadence sensors (iBike models manufactured in 2007-
2010) you'll see the messages "SPD FOUND" (speed found), "CAD FOUND" (cadence
found), "HRT FOUND" (heart rate found).
Once the main iBike screen appears you're ready to ride!
NOTE: IF YOUR IBIKE RIDE MEMORY IS 80% FULL OR MORE YOU WILL SEE WARNING
MESSAGES APPEAR. YOU CAN ERASE YOUR IBIKE MEMORY FROM THE IBIKE SETUP
SCREEN, "ERAS DATA".

"AUTO-WIND" AND "CAL WIND" FEATURE

For best accuracy of the iBike, the wind sensor must be calibrated prior to every
ride.
To help make the Cal Wind calibration as simple as possible, the iBike automatically
performs an "AUTO WIND" calibration each time the iBike is awakened from sleep.
You can also calibrate the wind sensor at any point during a bike ride with the "CAL WIND"
feature:
1) Enter Setup
2) The "Cal Wind" screen appears. Cup your hand over the wind port
21
Copyright Velocomp LLP 2005-2011