User Sequence - iBike Gen III Operating Instructions Manual

USER SEQUENCE

To access the USER sequence, enter Setup then click the up arrow to find the USER screen.
If the screen says "USER YES" then click the up arrow to enter the USER sequence; if the
screen says USER NO, then click the center button, select YES with the up arrow, then click
the center button to accept USER YES. Then, click the up arrow to enter the USER
sequence. Here are the steps included in the USER sequence:
"USER YES", click the up arrow successively to perform:
Set trainer mode (standard with iAero, optional with iPro): "TRNR": See page 43 for
•
details
Set Year: "YEAR"
•
Set Date: "DATE"
•
Set Time: "CLOC"
•
TIP: YEAR, DATE AND TIME CAN BE ENTERED INSTANTLY USING THE IBIKE SOFTWARE.
Set Display Contrast: "LCD"
•
Also, there are four other selections you can make in the User Sequence:
Perform Coast Down calibration: "COAST" (special instructions below)
•
Display ambient wind speed: "ABS WIND"
•
Perform Fitness Test: "FIT TEST" (special instructions below)
•
29
Copyright Velocomp LLP 2005-2011