iBike Gen III Operating Instructions Manual page 21

HOW TO START YOUR IBIKE PRIOR TO A RIDE
Each time you ride with the iBike, follow these simple steps:
1) Attach your iBike to your mount
2) Let your iBike acclimate to outdoor temperature for 5 minutes
3) Click the center button of your iBike to awaken it. If you are using a heart rate
strap, make sure to stand next to your iBike until your iBike competes its startup
process
4) During the startup process the iBike checks battery voltage. If the message "BATT
BAD" appears, replace your iBike and wireless mount batteries.
5) During the startup process cup your hand over the wind port while the "Auto Wind"
calibration occurs
At the end of the startup process the wireless sensors will be detected automatically by the
iBike.
If you have the iBike combined speed/cadence sensor, or you're using an ANT+ combined
speed cadence sensor, you'll see the message "SPCD FOUND":
20
Copyright Velocomp LLP 2005-2011