User Sequence - iBike Newton+ Operating Instructions Manual

USER SEQUENCE

To access the USER sequence, enter Setup then click the up arrow to find the USER screen.
If the screen says "USER YES" then click the up arrow to enter the USER sequence; if the
screen says USER NO, then click the center button, select YES with the up arrow, then click
the center button to accept USER YES. Then, click the up arrow to enter the USER
sequence. Here are the steps included in the USER sequence:
"USER YES", click the up arrow successively to perform:
Set trainer mode (standard with Newton+ and PowerStroke): "TRNR": See page 36
•
for details
Turn Fitness Training Feature On/Off: "Fit Trn Off/On"
•
Turn Auto Display On/Off: "Off/On Auto Disp"
•
Set Year: "YEAR"
•
Set Date: "DATE"
•
Set Time: "CLOC"
•
TIP: YEAR, DATE AND TIME CAN BE ENTERED INSTANTLY USING THE ISAAC SOFTWARE.
Set Display Contrast: "LCD"
•
Also, there are four other selections you can make in the User Sequence:
Perform Coast Down calibration: "COAST" (see page 21-23 for instructions)
•
Display ambient wind speed: "ABS WIND"
•
Set current temperature: "Temp Set"
•
Perform Fitness Test: "FIT TEST" (see pages 25-29 for instructions)
•
20
Copyright Velocomp LLP 2005-2013