Setting Wind Speed Display, Temperature - iBike Newton+ Operating Instructions Manual

SETTING WIND SPEED DISPLAY ("ABS
WIND YES/NO")
Your Newton+ measures opposing wind speed. Opposing wind includes both the absolute
ground wind that comes from nature, and the wind caused because you are riding your
bike. You can display opposing wind speed in one of two ways:
1) ABS WIND NO shows the TOTAL amount of wind opposing you. So, if you're
riding 20 mph and there is a headwind of 5 mph, your Newton+ will display the
opposing wind as 25 mph.
2) "ABS WIND YES" shows only the ground wind force opposing you. In the same
example as above, the Newton+ would show a wind speed of 5 mph. NOTE: if
you have a tail wind the Newton+ will show the magnitude of the tail wind.
In the Newton+ the default setting is ABS WIND YES.
The "ABS WIND NO/YES" setting is in the "USER" sequence. Make your selection with the
center button and up arrow, then click the center button again to accept.
SETTING TEMPERATURE
If the temperature shown on the Set Temperature screen is different from what you believe
it should be, click the center button, then use the up/down arrows to adjust the number to
the correct temperature, then click the center button to accept.
24
Copyright Velocomp LLP 2005-2013