Access To Mode: "Operating Data - Hermle Z 207 MK User Manual

1.8.2 Access to Mode: "Operating Data"

At commissioning of the centrifuge, you have the options to make the following basic changes:
-
-
-
-
The following operating data can be retrieved in this menu:
-
-
-
-
-
-
-
-
-
-
If the centrifuge is still turned off, press the keys, "time" (6) and "lid" (7) simultaneously, turning on
the main switch of the centrifuge. Now release both keys. As a result, a display test is administered
for approx. 5 seconds. All possible indications will appear at the same time (see Figure 6).
Figure 6
ATTENTION:
- The normal program mode can be changed back again by switching off the centrifuge, for a
short period!
All changed settings must be confirmed by the key "store" or "start" (9). A confirmation screen
-
will appear with the word, "store", in the display "rpm/rcf" (A-1) - Only then the pre-selections are
valid
© Hermle Labortechnik GmbH
Temperature Indication in °C or °F
Acoustic Signal Turn on / off
Keyboard Sound Turn on / off
Sleep mode setting
Number of Starts
Operating Hours of Centrifuge
Operating Hours of Motor
Software Version
Error List
Function of the Imbalance Switch
Operation of Keyboard
Hardware Version
Intermediate Circuit Voltage in Volt
Update touch control panel (only for service engineers)
(see )!
Figure 7
Z207MK_V1.21_eng
PRODUCT DESCRIPTION
9