Warranty; Basic Adjustment; Access To The Mode: "Standard Settings - Hermle Z 287 A Operating Manual

1.7.5 Warranty

The centrifuge has been subjected to thorough testing and quality control. In the unlikely case of any
manufacturing faults occurring, the centrifuge and rotors are covered by warranty, for a period of two
years, from date of delivery. This warranty becomes invalid in any case of mishandling, damage
and/or negligence and further in any case of usage of inappropriate spare parts and / or accessories
or unauthorized modification of the unit.
Technical modification rights are reserved, by the manufacturer, in regards to
technical improvement!

1.8 Basic Adjustment

1.8.1 Access to the Mode: "Standard settings"

While starting this model, the following basic settings can be performed:
-
-
-
The following operating data can be retrieved in this menu:
-
-
-
-
-
-
-
-
-
-
Open the centrifuge lid and shut off the main switch. Now switch on again the main switch. For
approximately 3 seconds the software version and the model type will be shown in the display (see
Figure 1). Press during this time the keys "time" (6) and "lid/stop" (10) simultaneously. As a result, a
display test is administered for approx. 3 seconds. All possible indications will appear at the same
time (see Figure 2). The LED light is flashing alternately with green and red color.
Figure 2
© Hermle Labortechnik GmbH
Signal Turn On / Off
Keybord Sound On / Off
Sleep Mode On / Off
Number of Starts
Operating Hours of Centrifuge
Operating Hours of Motor
Software Version
Error List
Function of the Imbalance Switch
Operation of Keyboard
Hardware Version
Intermediate Circuit Voltage in Volt
Display Tests
Z287A_V1.19
_eng
PRODUCT DESCRIPTION
9