Warranty; Basic Adjustments; Adjustment Of The Rotor Type - Hermle Z 207 MK User Manual

PRODUCT DESCRIPTION

1.7.5 Warranty

The centrifuge has been subjected to thorough testing and quality control. In the unlikely case of any
manufacturing faults occurring, the centrifuge and rotors are covered by warranty, for a period of two
years, from date of delivery. This warranty becomes invalid in any case of mishandling, damage
and/or negligence and further in any case of usage of inappropriate spare parts and / or accessories
or unauthorized modification of the unit.
Technical modification rights are reserved, by the manufacturer, in regards to technical
improvement!

1.8 Basic Adjustments

1.8.1 Adjustment of the Rotor Type

Before the first operation resp., after each rotor change, choose the respective rotor type. On the
rotor, find each rotor type in the printed order number.
Example:
Angle Rotor
Switch on the unit and open the lid. Press simultaneously the keys, "lid " (7) and "quick" (8). In the
display, "rpm/rcf" (A-1), appears the previous chosen rotor type, i. e. "221.59". Now the buttons can
be released.
With the control field (1), choose the used rotor now, (see Figure 5). To select the data, in the unit,
please press the, "start" (9) key. Inside the display (A-1), the confirmation appears as. "store".
Now, all important rotor parameters are stored.
Figure 5
Attention: Set rotor must always match with the used rotor, otherwise damage may occur to
the unit.
The rotor type can be checked, during the run, by pressing the key, "lid" (7).
8
221.59 V02 ≙ rotor type "221.59"
Z207MK_V1.21_eng © Hermle Labortechnik GmbH