General - Hisense HMC8C65TOA User Manual

 Full Screen: The LCD monitor displays input image signals in full
screen.
 Scale Screen: The LCD monitor displays full signals based on the
actual proportion. When screen utilization reaches the maximum
value, the upper/lower parts or the left/right sides of the screen may
not display images.
 Dot to Dot: The LCD monitor displays images to their actual sizes.
Note: The ZOOM options vary depending on different signals. The
Dot to Dot mode is not supported for low-resolution signals.
Geometry Adjust:
Note:
(1) Geometry Adjust is set to full-signal by default (which cannot be adjusted) when the
input signal is OPS, DP, DVI, HDMI, or USB.
(2) The Geometry Adjust menu is unavailable when ZOOM is set to Dot to Dot or Scale
Screen.
(3) The Geometry Adjust menu is unavailable when no signal is input.
(4) (4) The Phase, Clock, and Auto adjustment items are available only in VGA mode.
 Clock: Adjust the row width of the PC's input signals.
 Phase: Adjust the phase of the PC's input signals.
 Auto adjustment: Automatically adjust the position and size of an image.
3D NR: Select a level of 3D noise reduction. This feature optimizes image signals in time and space
to reduce external noise interference and restore the original signals. The options include OFF, High,
Middle, and Low.
Note: The 3D NR menu is inaccessible when the LCD monitor receives no signals.

General

Basic Operations
General
Image
Input Source: VGA
General
Auto Ambient Light: OFF
Internet
Auto Brightness: OFF
Dynamic Range: Auto
Sound
ADC Adjust
About
USB Settings: Intelligent USB
Clock Settings
19