Gige Vision Host Control Category; File Access Control Category - Dalsa Everywhereyoulook Linea Lite GigE User Manual

GigE Vision Host Control Category

The GigE Vision Host controls, as shown by CamExpert, group parameters used to configure the
host computer system GigE Vision features used for Linea Lite GigE networking management.
None of these parameters are stored in any Linea Lite GigE camera.
These features allow optimizing the network configuration for maximum bandwidth. Settings for
these parameters are highly dependent on the number of cameras connected to a NIC, the data
rate of each camera and the trigger modes used.
Information on these features is found in the Teledyne DALSA Network Imaging Module User
manual.

File Access Control Category

The File Access control in CamExpert allows the user to quickly upload various data files to the
connected Linea Lite GigE. The supported data files are for Linea Lite GigE firmware updates and
Flat Field coefficients.
Linea Lite GigE Series Camera Operational Reference • 103