Dalsa Everywhereyoulook Linea Lite GigE User Manual page 101

IP Configuration Status
None
PersistentIP
DHCP
LLA
ForceIP
Current IP Address
Current Subnet Mask
Current Default Gateway
Current IP set in LLA
Current IP set in DHCP
Current IP set in Persistent
IP
Primary Application IP
Address
Device Access Privilege
Control
Exclusive Access
Control Access
Current Heartbeat Timeout
GVCP Heartbeat Disable
Communication Timeout (in
msec)
Communication
Retransmissions Count
Fire Test Packet
MAC Address
Current Camera IP
Configuration
LLA
DHCP
PersistentIP
Persistent IP Address
Linea Lite GigE Series Camera
GevIPConfigurationStatus
GevCurrentIPAddress
GevCurrentSubnetMask
GevCurrentDefaultGateway
GevCurrentIPConfigurationLLA
GevCurrentIPConfigurationDHCP
GevCurrentIPConfigurationPersistentIP
GevPrimaryApplicationIPAddress
deviceCCP
ExclusiveAccess
ControlAccess
GevHeartbeatTimeout
GevGVCPHeartbeatDisable
GevMCTT
GevMCRC
GevSCPSFireTestPacket
GevMACAddress
GevCurrentIPConfiguration
GevPersistentIPAddress
Reports the current IP configuration status. (RO)
None Device IP Configuration is not defined.
PersistentIP Device IP Address Configuration is set to
Persistent IP (static).
Device IP Address Configuration is set to DHCP
DHCP
(Dynamic Host Configuration Protocol). Network
requires a DHCP server.
LLA Device IP Address Configuration is set to LLA
(Link-Local Address). Also known as Auto-IP.
Used for unmanaged networks including direct
connections from a device to a dedicated NIC.
ForceIP Device IP Address Configuration is set to
ForceIP. Used to force an IP address change.
Reports the IP address for the given network
interface. (RO)
Reports the subnet mask of the given interface.
(RO)
Reports the default gateway IP address to be
used on the given network interface. (RO)
Controls whether the LLA (Link Local Address) IP
configuration scheme is activated on the given
network interface. (RO)
Controls whether the DHCP IP configuration
scheme (Dynamic Host Configuration Protocol) is
activated on the given network interface.
Controls whether the PersistentIP configuration
scheme is activated on the given network
interface.
Returns the IP address of the device hosting the
primary application. (RO)
Controls the device access privilege of an
application.
Grants exclusive access to the device to an
application. No other application can control or
monitor the device.
Grants control access to the device to an
application. No other application can control the
device.
Indicates the current heartbeat timeout in
milliseconds.
Disables the GVCP (GigE Vision Control Protocol)
heartbeat monitor. This allows control
switchover to an application on another device.
Provides the transmission timeout value in
milliseconds.
Indicates the number of retransmissions allowed
when a message channel message times out.
When this feature is set to True, the device will
fire one test packet.
MAC address of the network interface. (RO)
Current camera IP configuration of the selected
interface. (RO)
LLA Link-Local Address Mode.
Dynamic Host Configuration Protocol Mode.
DHCP
Network requires a DHCP server.
PersistentIP Persistent IP Mode (static).
Persistent IP address for the selected interface.
This is the IP address the camera uses when
booting in Persistent IP mode.
Operational Reference • 99
Guru
Beginner
Beginner
Beginner
Guru
Guru
Guru
Guru
Guru
DFNC
Guru
Expert
Guru
Guru
Invisible
Invisible
Invisible
Invisible