Safety Statement - Hisense HMD5G21S User Manual


This device has been tested and proven to meet the requirements of GB4943.1-2011 Safety of
Information Technology Equipment, GB9254-2008 Information Technology Equipment - Radio
disturbance characteristics - Limits and method of measurement, and GB17625.1-2012
Electromagnetic compatibility - Limits - Limits for harmonic current emissions (equipment input
current ≤ 16 A per phase).

When the LCD monitor is used with a medical imaging system, ensure that the equipment
connected to the LCD monitor's signal I/O complies with medical equipment standards.

The electromagnetic waves emitted by power supply equipment may affect the use of the LCD
monitor and damage it. Install the LCD monitor in an environment free of electromagnetic wave
interference.

If this device generates interference or reacts to interference, please take one or more of the
following measures to remove the interference:

Adjust the position or direction of the affected equipment.

Increase the distance between the LCD monitor and the affected equipment.

Consult Hisense.

Use the power adapter and power cable provided by Hisense, and ensure that the LCD monitor is
properly connected to ground.

Do not modify or retrofit the LCD monitor by yourself. Failure to comply with cause interference
and damage to the LCD monitor.

Equipment classification

Anti-lightning class: Class I

operating mode: continuous

IP rating: IPX0

Safety Statement

22