Operational Instructions and Function Adjustment
Operational Instructions
Operational Instructions
Buttons of the LCD monitor
When the monitor is vertically placed, there are six adjustment buttons and one power button at
the lower right side of the frame, and the functions are defined as follows:
Button
DICOM300, DICOM350, DICOM400, DICOM450, DICOM500, DICOM550,
DICOM600, DICOM650, DICOM700, DICOM, Custom, and ALC.
Press this button to select the previous item or make adjustment. When no menu is
displayed, press this button to enter the backlight highlight state.
This button is used for downward selection or adjustment. When no menu is
available, you can press this button to enter the film clip mode.
OK button. Press this button to go to the main menu.
After you select a menu item, press this button to confirm the selection.
Press this button to return to the previous menu or close the current menu.
Press this button to start or shut down the LCD monitor, depending on the status of
the power indicator. When the LCD monitor is operating, the power indicator lights
on in green.
When the LCD monitor is shut down, the power indicator is turned off.
When the LCD monitor is in sleep mode, the power indicator lights on in orange.
Note
If the LCD monitor will not be used for a long time, shut down the LCD monitor or disconnect the
power plug to save power.
Mode Selection
When the LCD monitor is in the power-on state, you can select different display modes.
Mode
Definition
DICOM
Compliant with DICOM Part 14.
Custom
Compliant with Gamma, with support for custom parameter settings.
Function
11