Table of Contents
Advertisement
This menu allows you to configure the settings of a particular channel if the channel is being viewed via PC (for example, Web Client).
This menu allows you to configure the settings of a particular channel if the channel is being viewed via mobile devices. All the modifications you apply to these settings will
not affect the recorded video saved into the HDD.
Network: Substream & Mobilestream
• Channel:
•
Resolution: Set the screen resolution.
•
FPS: This parameter defines the number of frames per second at the remote session.
• Bitrate
want to select the predefined bitrate, choose Predefined mode.
•
Bitrate: This parameter is the data throughput during the remote session.
• Channel:
• Enable:
•
Resolution: Set the screen resolution.
•
FPS: This parameter defines the number of frames per second at the remote session.
• Bitrate
want to select the predefined bitrate, choose Predefined mode.
• Bitrate
such as gray wall is suitable constant bitrate (CBR). For more complex scene, such as busy street is
suitable variable bitrate (VBR).
•
Bitrate: This parameter is the data throughput during the remote session.
•
Audio: Check the box if you want to hear the live sound at the remote session. Make sure the
camera with audio capability is properly connected to the selected channel.
Select the channel to configure stream related information.
Mode: If you want to set the bitrate by yourself, then choose User-defined mode. If you
Select the channel to configure stream related information.
Enable to allow the remote access function.
Mode: If you want to set the bitrate by yourself, then choose User-defined mode. If you
Control: Select the bitrate level based on the complexity of the scene. For a simple scene,
Mars PRO Series NVR
23
Advertisement
Table of Contents
