Table of Contents
Advertisement
This menu allows you to view the online/connected cameras and add
You can connect your cameras to your NVR using the following three methods: directly through the PoE ports, through your local network, or remotely over
NOTE:
the Internet.
Display: IP Camera
the IP cameras to the
system. The NVR supports up to 32 IP cameras.
• Select Box
(
):
Check in the title bar to mark all cameras or next to a camera, to select that specific
camera.
•
Channel: Display camera name.
• Add/Delete
(
)/( ):
Click to add or delete a camera.
• Edit
(
): Click to modify the camera's settings.
• State
(
): View the camera state (online/offline).
• Modify
(
): Click to make modifications to the online camera.
• IP
Address/Domain:
Display the camera's IP address/domain.
• Subnet
Mask: Display the camera's subnet mask address.
•
Port: Display the camera's connection port.
•
Manufacturer:
Display the camera manufacturer's name.
• Device
Type: Display the device type.
• MAC
Address: Display the camera's MAC address.
• Firmware
Version: Display the camera's firmware version.
• Reconnect
Camera(s): Select the camera you wish to reconnect and click Reconnect.
The system will automatically assign a new IP address to the selected IP camera.
NOTE:
•
Delete: Select the camera you wish to remove and click Delete.
• Add
All: Click to add all available IP cameras to the system.
• User-defined
Add: Click to manually add the IP cameras. Enter the IP address/domain, alias,
position, port, protocol, user name, password, and bind channel.
Mars PRO Series NVR
11
Advertisement
Table of Contents
Need help?
Do you have a question about the Mars PRO Series and is the answer not in the manual?