Table of Contents
Advertisement
The DDNS provides a static address to simplify remote connection to your NVR. To use the DDNS, you first need to open an account on the DDNS service provider's web
page. For example, KGUARD.ORG: http://www.kguard.org.
Do not change the Switch parameters (IP Address, Subnet Mask, and Gateway) unless necessary.
RTSP stands for Real Time Streaming Protocol. This feature allows you to see the live view of the selected channel using the third party software application, such as VLC
Media Player.
Network: DDNS & Switch & RTSP
• DDNS:
Enable the DDNS service.
•
Server: Select the preferred DDNS server.
•
Domain: Enter the domain name you created on the DDNS service provider's web page. This will be
the address you type in the URL box when you want to connect remotely to the NVR via PC.
•
User/Password: Enter the user name and password you obtained when creating an account on
the DDNS service provider's web page. For example, username for KGUARD.ORG users is the email
address you used when creating the account on KGUARD.ORG web page.
•
Test: Click to test the DDNS settings.
• IP Address:
• Subnet
Mask: This is the Subnet Mask for the internal switch.
•
Gateway: This is the Gateway for the internal switch.
• Switch
Mode: Select the switch mode. For adding KGUARD ONVIF cameras (such as IPB-300 or
IPB-400) to PoE ports, set this setting to Auto Mode. For adding non-KGUARD ONVIF cameras to PoE
ports, set this setting to Manual Mode.
If you want to assign non-KGUARD ONVIF cameras to PoE ports, make sure to configure
NOTE:
the cameras on the same network segment as NVR Switch's IP Address and Gateway, and the
Switch Mode is set to Manual Mode.
• RTSP Enable:
•
Verify: Enable to prompt for an authentication user name and password.
• RTSP
Port:
default port 00554 is already taken by other applications, please change it.
• RTSP
UserName/Password: Enter the user name and password for accessing via RTSP protocol.
This is the IP address for the internal switch.
Enable the RTSP control protocol if you want to use it.
This is the port that the NVR will use to stream the real-time multimedia content. If the
Mars PRO Series NVR
25
Advertisement
Table of Contents
