Connecting To Network - KGuard Security TC801 User Manual

2.9 Connecting to Network

For remote monitoring, connect the DVR to the internet via wired network connection.
Notebook/PC
1
Plug one end of the RJ-45 cable to the LAN port on the back of the DVR.
2
Plug the other end directly into a LAN port on a router or network switch.
After connecting, configure your DVR for network communication. See
further details.
CH8 CH7 CH6 CH5
VIDEO IN VIDEO IN
AIN8 AIN7 AIN6 AIN5
AUDIO IN
Tablet PC
Mobile Phones
4-Channel DVR
CH4 CH3 CH2 CH1 VIDEO OUT
VIDEO IN VIDEO IN
AIN4 AIN3 AIN2 AIN1
AUDIO OUT
AUDIO IN
VGA
8-Channel DVR
CH4 CH3 CH2 CH1 VIDEO OUT
AIN4 AIN3 AIN2 AIN1
AUDIO OUT
VGA
Internet
"4.2 Setting the Network" on page 34
Chapter 2: Installation
CAUTION
A B G
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NETWORK RS485
CAUTION
A B G
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NETWORK RS485
NETWORK
RJ-45 cable
for
DVR User's Manual
17