NTP stands for Network Time Protocol. This feature allows you to synchronize the date and time automatically on the NVR over Internet. Therefore the NVR needs to be
connected to the Internet.
Mars PRO Series NVR
30
System: DST & NTP
• DST:
Enable if Daylight Saving Time (DST) is observed in your country.
• Time
Offset: Select the amount of time to offset for DST.
• Daylight Saving
Time: Choose to set the daylight saving time in weeks or in days.
• Start Time/End
Time: Set the start time and end time for daylight saving.
• NTP:
Enable if you want the NVR to update the date and time automatically.
• Server
Address: Select the NTP (Network Time Protocol) server.