Rs-485 Connection; Connecting To Network - KGuard Security SHA14 User Manual

2.4.2 RS-485 Connection

If you are using a PTZ speed dome, connect the camera cable to the video input of the DVR via RS-485 connector as
shown.
DC 12V
TX+ TX-
TX+ TX-

2.5 Connecting to Network

For remote monitoring, connect the DVR to the internet via wired network connection.
DC 12V LAN
TX+ TX-
LAN
Ethernet RJ-45
cable
1
Plug one end of the RJ-45 cable to the LAN port on the back of the DVR.
2
Plug the other end directly into a LAN port on a router or network switch.
After connecting, configure your DVR for network communication. See
further details.
1
LAN
2
VGA
VIDEO
OUTPUT
RS-485 cable
1 1 3 5 7
2 2 4 6 8
VIDEO
INPUT
VGA
VIDEO VIDEO AUDIO
OUTPUT INPUT OUTPUT
Internet
1 3 5 7
1 1
2 4 6 8
2 2
VIDEO
INPUT
VIDEO AUDIO AUDIO
INPUT
OUTPUT INPUT
Speed dome
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK.
DO NOT OPEN COVERS. NO USER
1 1 3 SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
2 2 4
AUDIO
INPUT
Notebook/PC Tablet PC
"4.2 Setting the Network" on page 31
Chapter 2: Installation
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK.
DO NOT OPEN COVERS. NO USER
SERVICEABLE PARTS INSIDE. REFER
3
SERVICING TO QUALIFIED SERVICE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
4
Mobile Phones
for
DVR User's Manual
15