This menu allows you to view the type of events when you want the NVR to issue an alarm.
Advanced: Events
• Event Type:
Select the event type. Options are:
- Disk Full: When HDD is full.
- Disk Error: If HDD is not detected properly.
- Video Loss: If camera is not detected properly.
• Enable:
Check the box to enable the monitoring of the event.
• Show Message:
Check the box to display a message on the screen when Disk Full, Disk Error, or
Video Loss event happens.
• Send Email:
Check the box to let the NVR to send you an auto-email when an event occurs. To set
up the email and schedule, please see
• Alarm Out:
If an alarm device is connected, check the box to make the device sound the alarm
when an event occurs.
• Latch Time:
Select the alarm sound duration of the I/O alarm device.
•
Buzzer: Set the buzzer duration when an event occurs. To disable buzzer, select Disable.
"Network: Email & Email Schedule" on page
Mars PRO Series NVR
24.
33