Rasledctl - Hitachi CE50-10 Instruction Manual

Table 5‒38: List of eclogsave command error messages
No.
1 Usage: eclogsave [ -d
logtype ]
2 eclogsave: Directory
not found.
3 eclogsave: Failed to
create log files
correctly.
4 eclogsave: command
execution error.
(XXXX)
List of log files stored in YYYYMMDDhhmmss-eclog.tgz when all log files are collected by the command
without the -d option specified.
YYYYMMDDhhmmss-eclog/1_RAS_LOG/raslog.tgz
<Execution example>
The following example shows how to run the command when a formatted USB (external media) is connected to
the unit and is recognized as /dev/sdb1.
$ sudo mkdir /tmp/logdir
$ sudo mount /dev/sdb1 /tmp/logdir
$ sudo eclogsave -d 4 /tmp/logdir
5.18.12 rasledctl
<Name>
rasledctl - Control lighting of the RAS indicator AP lamp.
<Format>

rasledctl

<Description>
This command controls lighting of the RAS indicator (AP).
<Options>
• -green
Turn on the green RAS indicator (AP) light.
• -red
Turn on the red RAS indicator (AP) light.
• -off
Turn off the RAS indicator (AP).
• -info
Indicate the current state of the RAS indicator (AP).
1. Display example when the indicator is lit green
RAS-LED(AP): Green
2. Display example when the indicator is lit red
RAS-LED(AP): Red
3. Display example when the indicator is off
RAS-LED(AP): Off
Error message
The specified argument is invalid.
The specified directory does not exist.
The log files haven't be saved correctly due to a system error.
eclogsave got error on running command.
XXXX: the command.
/2_MEM_DUMP/YYYYMMDDhhmmss.tgz
/3_SDA6_LOG/sda6.dump
/4_USER_LOG/userlog.tgz
/5_MAINT_INFO/maint_info.tgz
5. Configuring Software Environment
Description
121