Hitachi CE50-10 Instruction Manual page 56

5. Configuring Software Environment
Figure 5‒7: Apply button in the Displays screen
6. Click Keep Changes within 20 seconds.
The mode is changed to single display. If you do not click Keep Changes within 20 seconds or if you click
Revert Settings, the change is not applied and the original setting is retained.
Note that any change made in the settings by clicking Keep Changes will be retained after the unit restarts.
Figure 5‒8: Popup screen
If you want to set the single display back to dual displays, select Join Displays in the Displays screen, click the
Apply button, and then click Keep Changes.
40