Hitachi CE50-10 Instruction Manual page 151

Exit:
Used to save the changed configuration information to ROM, or to resume the defaults.
(4) Setup menu details
The following shows details of items that can be specified in each menu.
Table 7‒2: BIOS setup menu list
High order
menu
Main System Date
System Time
Boot Options
BIOS Version
System Memory
System
Information
Advanced EIST
Turbo Boost
USB Legacy
After AC Power On
CPU Frequency
Set item
--
--
NumLock On
Quick Boot Disabled
Network Boot Enabled
OS Selection Linux
Automatically
recognized
Automatically
recognized
Microcode Automatically
Revision recognized
GOP Version Automatically
recognized
FRC Version Automatically
recognized
TXE Version Automatically
recognized
Disabled
Disabled
Enabled
Power On
Normal
Frequency
Default
#1
Do not change the settings.
Do not change the settings.
Specify the processing to be performed when
the power to the unit is turned on.
Power On:
The OS automatically starts when the
power is turned on.
Stay Off:
The OS enters software power-off mode
when the power is turned on.
Auto:
If the OS was running when the power was
turned off the last time, the OS starts the
same way when Power On is specified. If
the OS was not running when the power
was turned off the last time, the OS enters
software power-off mode the same way
when Stay Off is specified.
Change the CPU frequency and TDP.
7. Maintaining the CE50-10
Notes
#2
135