Adding A User Account - Hitachi CE50-10 Instruction Manual

6. Managing User Accounts
6.1 Adding a user account
This operation uses a sudo command.
1. Enter a user name, and then run the adduser command.
Enter as follows.
$ sudo adduser user-name --gecos ""
2. Enter a password.
Enter a password that conforms to the policies. For details about the password policies, see 5.12.2 Setting
password policies.
New password:<Enter the password.>
Retype new password:<Enter the password again for confirmation.>
3. Check the output message.
When the user account has been added successfully, the following message appears.
passwd: password updated successfully
128