Fsconfchk - Hitachi CE50-10 Instruction Manual

5. Configuring Software Environment
- Hagiwara Solutions product
<Options>
No options need to be specified. Any specified options are ignored.
<Diagnosis>
For the exit code, 0 is returned if the status is normal and 1 is returned if an error is detected. Table 5‒35: List of
disklchk command error messages below shows error messages that are output when an error is detected.
Table 5‒35: List of disklchk command error messages
No.
disklchk: No supported disk.
1
2 disklchk: Failed to get SMART.
5.18.9 fsconfchk
<Name>
fsconfchk - Check mount definitions.
<Format>
fsconfchk [confname]
<Description>
fsconfchk is a check command for mount definition files in the user area. This command checks for syntax
errors in mount definitions, but it does not check the consistency with partition information in the disk.
<Options>
If no option is specified, the command checks the contents of the /hitachi/etc/fsconf file.
• [confname]
Specify the path of the file you want to check. If the file name is specified by the option, the command checks
the contents of that file.
<Diagnosis>
For the exit code, 0 is returned if the status is normal and 1 is returned if an error is detected. Table 5‒36: List of
fsconfchk command error messages below shows error messages that are output when an error is detected.
Table 5‒36: List of fsconfchk command error messages
No.
1 Device not found.
(line=X)
2 Illegal paramater.
(line=X, param=P)
3 XXXX file not found.
4 Invalid definition.
(line=X)
5
/dev/XXXX is
redefined. (line=Y)
118
Error message
Error message
The device file specified for device
on line X is not found.
The parameter P on line X is invalid.
The file specified for XXXX is not
found.
The number of parameters on line X is
invalid.
Device XXXX is specified more than
once. The second one is specified on
line Y.
Description
An unsupported SSD is installed.
An attempt to acquire SMART information failed.
Description
1. Check whether the device name is
2. Check whether the partition
Check whether the parameter is
correct.
Check whether the file name is
correct.
Check whether the parameters are
correct.
Delete the duplicated line.
Action
correct.
specified for device has been
created.