Settings View - Kemppi MasterTig 235ACDC Operating Manual

3.3.7 Settings view

To adjust settings:
1. Go to the Settings view.
2. Turn the control knob (1) to browse through the settings groups and parameters.
3. Select a parameter to be adjusted or changed by pressing the control knob button (1).
4. Adjust or change the setting by turning the control knob (1).
5. Close the parameter setting by pressing the control knob button (1).
Some of the settings are e.g. current mode and welding process specific and are visible or not visible in the settings
menu accordingly.
Common welding settings:
Parameter
Welding process
Current limit min
Current limit max
Remote control mode
Remote control min
Remote control max
© Kemppi
Value
TIG / MMA (Default = TIG)
TIG: 2 A / MMA: 8 A, step 1 A *
TIG: power source's nominal value / MMA:
power source's max. MMA current, step 1 A *
OFF / Remote / Torch (Default = OFF)
Min = "Current limit min", Max = "Current limit
max"
Min = "Current limit min", Max = "Current limit
max"
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Note
Selecting a welding process changes auto-
matically to the last active channel for the selec-
ted process.
When a remote control or a torch remote control
is selected, the welding current adjustment on
the control panel is disabled.
46
Operating manual - EN
1920900 / 2052