Button remote channel
control
Wireless remote
TIG settings:
Parameter
Balance limit min
Balance limit max
Lift TIG current
HF spark force
Positive ignition current
Positive ignition time
Negative ignition current
Ignition current
Negative ignition time
Ignition time
Slight upslope
Startup level
Downslope cut level
2T downslope cut
Nonlinear downslope
Current freezing
TIG antifreeze
AC phase swap current
MMA settings:
Parameter
Welding current
Hot start
Arc force
MMA antifreeze
© Kemppi
OFF / ON (Default = OFF)
Pairing starts automatically when selected
Value
-99 ... 0, step 1 (Default = -60)
0 ... +20, step 1 (Default = 0)
5 A ... 40 A / Auto, step 1 A (Default = Auto =
10 A)
50 % ... 110 %, step 1 % (Default = 100 %)
30 % ... 150 % / Auto, step 1 % (Default =
Auto)
0 ms ... 50 ms / Auto, step 10 ms (Default =
Auto)
(ACDC): 100 % ... 300 % / Auto, Step 1 %
(Default = Auto)
(DC): 100 % ... 300 % / Auto, step 1 %
(Default = Auto)
(ACDC): 0 ms ... 950 ms / Auto, step 10 ms
(Default = Auto)
(DC): 0 ms ... 950 ms / Auto, step 10 ms
(Default = Auto)
OFF / ON (Default = OFF)
5 % ... 40 %, step 1 % (Default = 10 %)
5 % ... 40 %, step 1 % (Default = 10 %)
OFF / ON (Default = OFF)
0 % ... 50 %, step 1 % (Default = 0 %)
OFF / ON (Default = OFF)
OFF / ON (Default = OFF)
5 A ... 20 A / Auto
Value
Min/Max = Normal welding current limits
-10 ... +10, step 1 (Default = 0)
-10 ... +10, step 1 (Default = 0)
OFF / ON (Default = OFF)
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
New pairing information replaces the old inform-
ation.
Pairing status is shown as the settings value.
Note
Note
47
Operating manual - EN
1920900 / 2052