Connecting Tig Torch - Kemppi MasterTig 235ACDC Operating Manual
Hide thumbs
Also See for MasterTig 235ACDC:
- Operating manual (77 pages) ,
- Operating manual (85 pages) ,
- Operating manual (73 pages)
Table of Contents
Advertisement
2.6 Connecting TIG torch
Gas-cooled TIG torch:
1.
Assemble the TIG torch according to the instructions delivered with the torch.
2.
Connect the TIG torch cables to the power source. Secure by turning the connectors clockwise.
Water-cooled TIG torch:
The cooling unit must already be installed and in place at this stage. Refer to "Installing cooling unit" on page 10.
1.
Assemble the TIG torch according to the instructions delivered with the torch.
2.
Connect TIG torch cables and the water cooling inlet and outlet hoses to the units. Secure by turning the con-
nectors clockwise.
The water cooling connectors are color-coded.
Tip: For Kemppi welding torches, refer also to userdoc.kemppi.com.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
15
Operating manual - EN
1920900 / 2052
Hide quick links:
Advertisement
Table of Contents
