Setting Parameters; Initial Parameters; Optical Black Transfer Mode - JAI AD-131GE User Manual

10.6.10.1

Setting parameters

In order to execute Multi ROI operation, it is necessary to set ROI mode, and ROI size and offset
in ROI selector. There is one set each for Camera #0 and Camera #1.
ROI Mode：
Can be set 1 to 5. This sets the number of ROIs. For multi ROI operation, this should be set
from 2 to 5. A total of 5 ROI can be set.
ROI Selector：
In ROI Selector, there is ROI 1 to 5 and each has Width, Height, Offset X and Offset Y
settings.
The following is how the settings appear in the GUI.
If ROI Mode is set to 1, only one ROI can be set.
In order to use Multi ROI, it should be set at 2 or more. A maximum of 5 ROIs
can be set. The size for each ROI can be set by ROI selector.
10.6.10.2

Initial parameters

ROI Mode
ROI Selector
ROI 1
ROI 2
ROI 3
ROI 4
ROI 5
10.6.11

Optical Black transfer mode

It is possible for the user to decide whether the optical black (OB) portion of the image will be
transferred or not. The optical black part can be used for black reference in the application
software. By setting ―OB Transfer Enable‖ to True, the width max is changed from 1296 to
1312 and the height max is changed to 966 to 970 which includes OB for 16 horizontal pixels
and 4 vertical lines.
.
Camera 0
1
Width Height Offset X
1296 966 0
1296 966 0
1296 966 0
1296 966 0
1296 966 0
AD-131GE
Offset Y Width Height
0 1296 966
0 1296 966
0 1296 966
0 1296 966
0 1296 966
70
Camera 1
1
Offset X Offset Y
0 0
0 0
0 0
0 0
0 0