Exposure Time; 10.3.3 Exposure Auto; Action Control - JAI AD-131GE User Manual

TriggerWidth：
The following is the table for the combination of ExposureMode and TriggerControl
and its function.
TriggerSelector
ExposureMode
OFF
Timed
TriggerWidth
10.3.2

Exposure Time

This is effective only if ExposureMode is set to"Timed". This command can set the exposure
time.
The setting can be done in 1μs / step.
Minimum:
Maximum:

10.3.3 Exposure Auto

This is auto exposure control function and is effective only in the "Timed"mode. The
reference video level is controlled by JAI AGC Reference. ExposureAuto includes OFF, Once
and Continuous modes.
The following detailed settings are aslo possible.
ExposureAuto speed:
ExposureAuto Max:
ExposureAuto Min:
GainAutoReference:
10.4.

Action Control

ActionControl is used to activate the specific functions of multiple cameras on the same
network at the same time. For instance, it can be used to trigger multiple cameras at the
same time.
ActionControl appears as two inputs (Action 1, Action 2) and is connected with 6 Triggers,
CounterReset of the counter, CounterTrigger and Timer. If ActionControl is used, the input
source to the trigger should be set to Action 1 or Action 2 in advance.
AD-131GE
If FrameStart in TriggerSelector is "ON", this functions as the
EPS mode.
Note: JAI Pre-Dump can be available by using TriggerOption.
This mode controls the exposure time by the pulse width.
If FrameStart in TriggerSelector is "OFF",
The camera operates in Free Run.
If FrameStart in the TriggerSelector is "ON", this functions as
the PWC mode.
Frame
Start
OFF or Trig OFF(Free run)
ON Exposure controllable
Trig OFF(Free run)
OFF Exposure control is
possible
Trig On
ON
Trig OFF(Free run)
OFF
No Exposure control
Trig On
ON
11.49μs
31.76msec
The reaction speed can be controlled
Set the maximum exposure time
Set the minimum exposure time
Set the reference video level for operation
48
Previous JAI
Operation trigger name
(for reference)
Trigger
OFF
Trigger
OFF
EPS
Trigger
OFF
PWC