JAI AD-131GE User Manual page 56

Important Note:
The trigger minimum active period is 2L and the minimum interval of the trigger is shown
below.
SYNC Mode Smearless
Enable
SYNC False
Mode=
SYNC
True
SYNC False
Mode=
ASYNC
True
1) LVAL SYNC/ASYNC can be selected automatically.
2) Frame interval of full frame in continuous operation is 982L and if JAI partial scan is set
to True, please refer to 8.4.3
3) If Smearless Enable is set to True, only LVAL Async is available.
AD-131GE
Minimum trigger interval (Line)
LVAL Frame interval in continuous operation + Larger
ASYNC Exposure Time(Raw) between camera #0 and camera
#1 + 5L
LVAL
① If Exposure Time(Raw) range is 3L to (Frame
SYNC
interval in continuous operation(L) - 1L)
Frame interval in continuous operation +
Difference between camera #0 and camera #1 +
5L
② If JAI Partial Scan is set at True and Exposure
Time(Raw) range is Frame interval in continuous
operation(L) to 982L
Frame interval in continuous operation(L)
+(Difference between camera #0 and camera #1
exposure time）+ 5L + ( Smaller exposure time
between camera #0 and camera #1 - Frame interval in
continuous operation(L) + 1L)
LVAL Smear less period[196L]+ 1 + (Larger exposure time
ASYNC
between camera #0 and camera #1）+ Frame interval
in continuous operation(L) + 6L
LVAL Frame interval in continuous operation(L) + Exposure
ASYNC Time(Raw) + 5L
LVAL
If Exposure Time(Raw) range is 3L to (Frame
①
SYNC
interval in continuous operation(L) - 1L)
Frame interval in continuous operation(L) + 5L
If JAI Partial Scan is set to True and Exposure
②
Time(Raw) range is Frame interval in continuous
operation (L) to 982
Frame interval in continuous operation(L) + Exposure
Time(Raw) – Frame interval in continuous
operation(L) + 6L
LVAL Smearless period[196L]+ 1 +Exposure Time(Raw)+
ASYNC Frame interval in continuous operation (L)+ 6L
Partial Scan Vertical Timing for the frame interval.
55