Video Signal Output; Sensor Layout - JAI AD-131GE User Manual

8.

Video Signal Output

8.1.

Sensor layout

976
4 12
dummy
In the GigE Vision Format, only Active Pixel Area is output and the area of dummy and reserved
is not output. If the OB transfer mode is set ON, OB parts of 8 pixels on the top and 16 pixels on
the right are output.
Note for output image:
The output area depends on the settings of Pixel Format as well as OB transfer Enable.
The available display image is indicated by ―Width Max‖ and ―Height Max‖ in the control tool.
The following table shows relations pixel format and Width Max/Height/Max in different scan
mode.
OB Transfer
Enable
JAI Partial Scan
Binning Vertical
Width
Max
Mono8
Mono 10,Mono 12
1296
Mono10_PACKED
Mono12_PACKED
Note: In the AD-131GE, the combination of Binning Vertical="2"(V-Binning On) and JAI Partial
Scan="True" is not available.
1348
Optical Black Lines
Active Pixels
1296 (H)x966(V)
Optical Black Lines
1660 Clock
1296
Read Out(Horizontal)
Fig.24． Sensor layout and Video output image
"False" "True"
"False"or
"False"
"True"
"1" "1"
Height Width Height
Max Max
966 1312
AD-131GE
40
"True‖
"True‖
"1‖
Width Height
Max Max Max
970 1312 966
29
blank Read Out
(Vertical)
2
2
978
966
8
308
blank
"False‖ "True‖
"False‖ "False‖
"2‖ "2"
Width Height Width
Max Max Max
1296 483 1312
Height
Max
483