A-Neuvideo ANI-8X2MFS Instruction Manual page 40

A NEUVIDEO
Serial and Telnet Commands
COMMAND
SET RELAY N1 N2 8
GET RELAY N1 8
Note: Commands will not be executed unless followed by a carriage return. Commands are not case-sensitive.
DESCRIPTION AND PARAMETERS
Open or close the specified relay.
N1 = 1~2 [Relay port number]
Available values for N2:
ON [Closed]
OFF [Open]
Show the current state of the specified relay.
N1 = 1~2
[Relay port number]
38
Serial & Telnet Commands