A
NEUVIDEO
System Tab
■ IR: Use the dropdown to select which HDBaseT
In1, and HDBT In2.
4. RESET TO DEFAULT:
will reboot automatically.
5. FIRMWARE UPGRADE:
select the firmware update file (*.bin format) located on your local PC. After selecting the file, click the "Upgrade" button to begin the
firmware update process. After the upgrade is complete, the unit will reboot automatically.
port the local IR ports should route across. Available choices are: HDBT Out, HDBT
™
Press the "ALL Reset" button to reset the unit to its factory default state. After the reset is complete, the unit
To update the unit's firmware, click the "Choose File" button to open the file selection window and then
29
WebGUI Control