A-Neuvideo ANI-8X2MFS Instruction Manual page 39

A NEUVIDEO
Serial and Telnet Commands
COMMAND
SET IN N1 EDID N2 8
GET IN N1 EDID 8
GET IN EDID LIST 8
SET IN N1 HDCP MODE N2 8
GET IN N1 HDCP MODE 8
GET IN N1 HDCP STATUS 8
GET OUT N1 HDCP STATUS 8
DESCRIPTION AND PARAMETERS
Available values for N2:
0 [Default FHD 2CH]
1 [Default FHD MCH]
2 [Default UHD 2CH]
3 [Default UHD MCH]
4 [Default UHD+ 2CH]
Show the EDID currently being used on the specified input.
Available values for N1:
1 [USB-C input]
2 [DisplayPort input]
3 [HDMI input 1]
4 [HDMI input 2]
List all available EDID selections.
Set the HDCP behavior of the specified input.
Available values for N1:
1 [USB-C input]
2 [DisplayPort input]
3 [HDMI input 1]
4 [HDMI input 2]
5 [HDMI input 3]
6 [HDMI input 4]
7 [HDMI input 5]
Show the current HDCP behavior used by the specified input.
Available values for N1:
1 [USB-C input]
2 [DisplayPort input]
3 [HDMI input 1]
Show the current HDCP status of the specified input.
Available values for N1:
1 [USB-C input]
2 [DisplayPort input]
3 [HDMI input 1]
4 [HDMI input 2]
5 [HDMI input 3]
6 [HDMI input 4]
7 [HDMI input 5]
Show the current HDCP status of the specified output.
Available values for N1:
A [HDMI output]
B [HDBaseT output]
™
37
Serial & Telnet Commands
5 [Default UHD+ MCH]
6 [Default VGA]
7 [User EDID 1]
8 [User EDID 2]
9 [HDMI sink]
10 [HDBaseT sink]
™
5 [HDMI input 3]
6 [HDMI input 4]
7 [HDMI input 5]
8 [VGA input]
Available values for N2:
0 [HDCP support disabled]
1 [HDCP support enabled]
4 [HDMI input 2]
5 [HDMI input 3]
6 [HDMI input 4]
7 [HDMI input 5]
Possible response values:
0 [No HDCP]
1 [HDCP 1.x]
2 [HDCP 2.2]
Possible response values:
0 [No HDCP]
1 [HDCP 1.x]
2 [HDCP 2.2]
3 [HDCP 1.x failed]
4 [HDCP 2.x failed]