A-Neuvideo ANI-8X2MFS Instruction Manual page 18

A NEUVIDEO
PICTURE
6. RESET PICTURE: Reset all picture settings back to their factory defaults. Select "Execute" to activate the reset.
2ND LEVEL
Color Gain R
Color Gain G
Color Gain B
Color Offset R
Color Offset G
Color Offset B
Brightness
Contrast
Fine Tune HDMI
(Digital sources only)
Fine Tune PC
(Analog sources only)
Reset Picture
AUDIO
1. HDMI OUT BYPASS: Enable or disable HDMI audio bypass mode. When enabled, all audio will automatically behave as if in "Follow
Video" mode and bitstream audio can be supported.
Note: This bypass setting affects audio only.
2. AUDIO ROUTING: Select the audio routing behavior of the unit.
■ Follow User: Audio routing will follow the selections made in the "Follow User Setting" section.
■ Follow Video: All digital sources will use their native embedded audio content. VGA 1 will use the Analog 1 audio input and VGA 2
will use the Analog 2 audio input.
■ Fixed Analog 1~6: Forces all video sources to be paired with the selected analog audio source.
3RD LEVEL
0~1023 (512)
0~1023 (512)
0~1023 (512)
0~1023 (512)
0~1023 (512)
0~1023 (512)
0~60 (30)
0~60 (30)
Hue
Saturation
Sharpness
NR
PC Auto
PC H Position
PC V Position
PC Clock
PC Phase
PC Reset
NO
Execute
4TH LEVEL
0~60 (30)
0~60 (30)
0~60 (30)
OFF
Low
Middle
High
Auto
EXECUTE
0~250
0~250
0~250
0~255
NO
Execute
16
OSD Menu