A-Neuvideo ANI-8X2MFS Instruction Manual page 37

8x2 4k@60hz multi-format hdmi/dp/usb-c/vga to hdmi/hdbaset scaler presentation switch w/ audio
Table of Contents

Advertisement

A
NEUVIDEO
Serial and Telnet Commands
COMMAND
GET OUT A OSD TRANSPARENCY
LEVEL 8
SET OUT A OSD DISPLAY N1 8
GET OUT A OSD DISPLAY 8
SET OUT A OSD DISPLAY N1 8
GET OUT A OSD DISPLAY 8
SET AUDIO OUT N1 MUTE N2 8
GET AUDIO OUT N1 MUTE 8
SET AUDIO OUT ALL MUTE N1 8
SET AUDIO OUT A ROUTE N1 8
GET AUDIO OUT A ROUTE 8
SET AUDIO OUT N1 VOLUME N2 8
DESCRIPTION AND PARAMETERS
Show the current transparency level of the OSD menu.
Enable/disable the info OSD, or set it to display briefly.
Available values for N1:
0
[Always off]
1
[Always on]
2
[Display briefly]
Show the current info OSD state.
Enable/disable the info OSD, or set it to display briefly.
Available values for N1:
0
[Always off]
1
[Always on]
2
[Display briefly]
Show the current info OSD state.
Enable or disable muting the specified audio output.
Available values for N1:
A
[HDMI audio output]
B
[HDBaseT
audio output]
C
[Standard analog audio output]
D
[Amplified analog audio output]
Available values for N2:
0
[Mute disabled]
1
[Mute enabled]
Note: The HDMI and HDBaseT
Show the current mute state of the specified output.
Available values for N1:
A
[HDMI audio output]
B
[HDBaseT
audio output]
C
[Standard analog audio output]
D
[Amplified analog audio output]
Enable or disable muting on all audio outputs.
Available values for N1:
0
[Mute disabled]
1
[Mute enabled]
Set the audio source selection behavior of the unit.
Available values for N1:
0
[Follow user mode]
1
[Follow video mode]
2
[Analog audio input 1]
3
[Analog audio input 2]
Show the unit's current audio source selection behavior.
Set the volume level of the specified output's audio.
Available values for N1:
A
[HDMI audio output]
B
[HDBaseT
audio output]
N2 = 0~100
[Volume level]
Note: The HDMI and HDBaseT
35
Serial & Telnet Commands
outputs share their settings.
4
[Analog audio input 3]
5
[Analog audio input 4]
6
[Analog audio input 5]
7
[Analog audio input 6]
C
[Standard analog audio output]
D
[Amplified analog audio output]
outputs share their settings.

Advertisement

Table of Contents
loading

Table of Contents