A-Neuvideo ANI-8X2MFS Instruction Manual page 27

A NEUVIDEO
HDCP Tab
Picture Tab
2. PICTURE SETTINGS (DIGITAL SOURCES):
■ Hue: Provides control over the hue shift of the scaled output image.
■ Saturation: Provides control over the color saturation level of the scaled output image.
■ Sharpness: Provides control over the amount of sharpness processing to apply to the scaled output image.
■ Noise Reduction: Provides control over the aggressiveness of the digital noise reduction processing when applied to the scaled
output image. Selecting "Off" disables all noise reduction processing.
Provides control over the HDCP behavior of each
input. To enable or disable HDCP support on one or
more inputs, select the preferred inputs on the left,
and then select the HDCP mode on the right. The
change will occur immediately.
Note: The VGA inputs are not listed as they cannot
support HDCP.
This tab provides controls over the scaled video
output's color, brightness, contrast. When a digital
source is selected hue, saturation, sharpness and
noise reduction are also controllable. When a VGA
input is selected, the available controls will change
and auto set, H/V position, clock and phase will
become adjustable instead.
Note: These features are not active when HDMI
bypass mode is enabled.
1. PICTURE SETTINGS (GLOBAL):
■ Color Gain R/G/B: These sliders provide control
over the red, green, and blue color gain level of the
scaled output.
■ Color Offset R/G/B: These sliders provide
control over the red, green, and blue color offset
level of the scaled output.
■ Brightness: Provides control over the overall
brightness of the scaled output image.
■ Contrast: Provides control over the overall
contrast of the scaled output image.
25
WebGUI Control